Here is a quick configuration for configuring direct to voicemail transfer. In this configuration I am configuring number 1+Extension number as the way to go directly to a users voicemail box. All my user extensions are in the 7000-7999 range.
First create a voice translation-rule and profile to strip the “1″.
voice translation-rule 1
rule 1 /^17/ /7/
!
voice translation-profile strip1
translate redirect-called 1
!
Then apply the translation profile to voicemail dial-peer:
dial-peer voice 400 voip
description Voicemail
translation-profile outgoing strip1
destination-pattern 2500
session protocol sipv2
session target ipv4:192.168.1.5
dtmf-relay sip-notify
codec g711ulaw
no vad
!
Lastly, create an Directory number that uses wildcards and have it call-forward all to the voicemail number:
ephone-dn 15
number 17…
description transfer directly to VM
call-forward all 2500
!
Check out our free Unified Communications Tutorial at http://www.voip-tutor.com/freetutorial.htm
Tags: CME, communications manager, CUE, Express, Unified Communications, Unity, voicemail, voip